Velocity Micro SEAL-IT 100 manual Profiles tab

34

Chapter 2: SEAL-IT 100

SEAL-IT 100 Device Driver User Guide

To seal or trim a single plate using ABgene SEAL-IT 100 diagnostics:

1.Open ABgene SEAL-IT 100 Diagnostics.

2.Click the Controls tab.

3.If the SEAL-IT 100 is not initialized, click Initialize this profile on the

Profiles tab.

4.To seal a plate and cut (trim) the seal from the roll, click Seal.

5.To trim the seal roll, click Trim.

You might do this after first loading a roll of seal.

Note: The parameters set in the profile are used for the sealing and trimming operations.

Related topics

For more information about...	See...
Opening diagnostics	“Opening diagnostics” on page 12
The workflow for configuring the	“Workflow for configuring the SEAL-IT
SEAL-IT 100	100” on page 28
Creating a SEAL-IT 100 profile	“Creating a SEAL-IT 100 profile” on
	page 29
Managing SEAL-IT 100 profiles	“Managing SEAL-IT 100 profiles” on
	page 32
Initializing a device	“About device initialization” on page 25