Statement of Agency Compliance
The VS 2030 has been tested for compliance with FCC regulations and was found to be compliant with all applicable FCC Rules and Regulations.
IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, this de- vice must not be
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The VS 2030 has been tested for compliance to CE standards and guidelines and was found to conform to applicable CE standards, specifically the EMC requirements EN 55024, ESD EN
The VS 2030 can be set to use targeting lasers. The VS 2030’s targeting laser emits Class 2M radiation outside of the product per IEC
The VS 2030 has been tested by an independent electromagnetic compatibility laboratory in accordance with the applicable specifications and instructions.
37AW
E300884
Laser/LED Radiation |
|
Wavelength: |
|
Maximum Output: <1mW |
|
Laser Pulse Duration: 0.977 mSec. |
|
LED Pulse Duration: 0.255 uSec. | Laser aperture |
Enlarged for readability
CAUTION - CLASS 3R
LASER RADIATION
WHEN OPEN
AVOID DIRECT EYE
EXPOSURE
Enlarged for readability
A Warning Label (see left) is located on the underside of the VS 2030 near the battery locking mechanism as pictured (see right).
Videk voids product warranty if the hard case has been opened or tam- pered with in any way. Opening the case may put the user at risk of laser radiation exposure (Class 3R). A second Warning Label (see left) is placed within the casing structure as pictured (see right).
Caution – Use of controls or adjustments, or performance of procedures other than those specified herein may result in hazardous radiation exposure.
In addition, a CB Test Certificate has been issued by the National Cer- tification Board (NCB) indicating VisionSensor 2030 (VS 2030) meets all safety and quality standards in accordance to IEC
Save Settings | K11020 VisionSensor™ 2030 User Manual, Rev. E, Software ver. 3.1.1000, August 3, 2007 - ii |
| |
|
|
