7.1 - Reset Reader to Factory Defaults
Scan the following codes to reset reader:
Reset to USB Factory | Reset to RS232 Factory |
Default Settings | Default Settings |
Bootloader Mode
Bootloader mode is utilized to download new version of bootloader firmware and custom applications.
Clear All CodeXML Rules | Clear All Stored Data | Save Settings |
Prefix & Suffix |
|
|
Note: If you scan these codes, you may lose your current settings. Make sure to save settings on your reader before scanning the above codes.
7.2 - General Safety Information
Repairs and Adjustments - Only those individuals authorized by Videk should attempt to make repairs or adjustments to VS 2030 equipment. If the reader casing is opened the warranty is voided.
Power Supply - Use only the power supply provided for use with each specific unit when operating Videk equipment.
Accessories - Only those accessories approved by Videk should be utilized with Videk equipment.
•Injury to individuals handling the equipment;
•Damage to the equipment; and
•Voiding of the maintenance contract.
Lasers - The VS 2030 utilizes a laser FOR TARGETING PURPOSES ONLY. If the laser is activated, do not stare into the beam. See pg. i for further information regarding laser warnings.
Save Settings | K11020 VisionSensor™ 2030 User Manual, Rev. E, Software ver. 3.1.1000, August 3, 2007 - 53 |
|
