Videk 2030 manual Reader ID and Firmware Version, Reader Settings Locked

4.7 - Reader ID and Firmware Version

To find out the Reader ID and firmware version, plug your VisionSensor 2030 into your USB or RS232 cable, open a text editor program (i.e. Notepad, Microsoft Word...) and read the following code:

Reader ID and Firmware

You will get a text string with your firmware version and VisionSensor™ 2030 ID number (serial number):

Example: Xap/i33083266none0010010969A07D0016VS-3.1.1000

Template: Xap/iaaaabbbbccccddddddddddeffggggghh-h.h.hhhh

Xap/i - internal product ID (5 char)

aaaa- base firmware version number (4 char), 3308 in above example

bbbb- bootloader firmware version number (4 char), 3266 in above example

cccc- radio firmware version number (4 char), none in above example

dddddddddd- reader serial number (10 char), 0010010969 in above example

e is “A” if running firmware is the application, “B” if bootloader (1 char), A in above example

ff- supplemental internal ID (2 char), 07 in above example

ggggg- display flag and flash file system version (5 char), D0016 in above example

hh-h.h.hhhh- application firmware ver number (11 char), VS-3.1.1000in above example

Additional control characters will also appear in the output string.

Note: Videk will periodically release new firmware for VisionSensor™ 2030 units. For information on latest firmware versions, call Videk at (585) 292-6210 or (800) 248-4335. To upgrade the firmware please visit Videk Website at http://www.videk.com/support/downloads.htm and follow instructions.

4.8 - Reader Settings Lock

To lock or unlock the current settings on your reader please scan the codes below:

Reader Settings Locked Reader Settings Unlocked

NOTE: Prefix and Suffix programming codes, memory transfer and delete commands, “Clear All CodeXML Rules” and “Suffix -Erase/None” commands are not locked by this feature.

Save Settings K11020 VisionSensor™ 2030 User Manual, Rev. E, Software ver. 3.1.1000, August 3, 2007 - 42