3.1 - Introduction
The following chapter will allow a user to change the symbology settings on the VS 2030. To reset the unit to factory defaults or to save the current settings please scan one of the codes below:
Save Settings | Reset to USB Factory Defaults |
Reset to RS232 | Clear All CodeXML Rules |
Factory Defaults |
|
Readers are shipped from manufacturing with initial communication settings that are hardware dependent. Note: If you do not save your settings and the VS 2030 loses power you will lose your settings.
3.2 - Aztec Symbology
Scan the following codes to enable/disable Aztec symbology settings:
Aztec On | Aztec Off (Default) | Sample Aztec Code |
3.3 - Codabar Symbology
Scan the following codes to enable/disable Codabar symbology settings:
Codabar On (Default) | Codabar Off | Sample Codabar |
Save Settings | K11020 VisionSensor™ 2030 User Manual, Rev. E, Software ver. 3.1.1000, August 3, 2007 - 27 |
|
