Vidikron Vision 120 operation manual 1Introduction, About This Manual

1Introduction

This Owner’s Manual describes how to install, set up and operate the Vidikron Vision Model	1.1
120 DLP Projector and VHD Controller. Throughout this manual, the Vidikron Vision Model	About This Manual
120 DLP Projector and VHD Controller are referred to collectively as the “Vision 120.”
Vidikron has prepared this manual to help home theater installers and end users get the	Target Audience
most out of the Vision 120.
Vidikron has made every effort to ensure that this manual is accurate as of the date it was
printed. However, because of ongoing product improvements and customer feedback, it
may require updating from time to time. You can always find the latest version of this and
other Vidikron product manuals on-line, at www.Vidikron.com.
Vidikron welcomes your comments about this manual. Send them to info@Vidikron.com.	If You Have Comments About
	This Manual...
Text Conventions: The following conventions are used in this manual, in order to clarify the	Textual and Graphic
information and instructions provided:	Conventions

•Remote and built-in keypad button identifiers are set in upper-case bold type; for example, “Press EXIT to return to the previous menu.”

•Computer input (commands you type) and output (responses that appear on-screen) is shown in monospace (fixed-width) type; for example: “To change the aspect ratio to Letterbox, type SAR 2<Enter>.”

•All keys with functional names are initial-capped, set in bold type and enclosed in angle brackets. These keys are the following: <Enter>, <Spacebar>, <Control>, <Esc> and <Tab>.

•<Enter> indicates that you may press either the RETURN or ENTER key on your keyboard if it has both keys.

In addition to these conventions, underlining, boldface and/or italics are occasionally used to highlight important information, as in this example:

A carriage return must be used after each command or string.

Note

Vidikron Vision Model 120 Installation/Operation Manual 1