Serial Communications
Table 6-1. Serial Commands and Responses (continued)
Command | Description | Response |
|
|
|
Image Preset Commands
SISF 0
SISF 1
SISF 2
SISF 3
Loads “ISF Night” image preset
Loads “ISF Day” image preset
Loads “Custom 1” image preset
Loads “THX” image preset
ISF Night
ISF Day
Custom 1
THX
Menu Navigation Commands
The following serial commands are meant to emulate buttons on the remote control or VHD Controller front panel. Each button has its own serial command, so effectively it is as if you were using the IR remote only you’ll be doing so via serial commands. These commands provide active OSD responses just like the IR remote.
ENTR
EXIT
MENU
MND
MNL
MNR
MNU
ENTER (or SELECT) button
EXIT button
MENU button
) button
) button
) button
) button
(none)
Picture Adjust Commands
The following serial commands are meant to emulate the discrete picture adjustment buttons on the remote control unit. Use them in conjunction with MNL and/or MNR to make picture adjustments. For example, to increase Brightness by five increments, send this sequence of commands:
MBR <Enter>
MNR <Enter>
MNR <Enter>
MNR <Enter>
MNR <Enter>
MNR <Enter>
EXIT <Enter>
MBR
MCOL
MCON
MTIN
Adjust Brightness
Adjust Color Level
Adjust Contrast
Adjust Tint
(none)
Vidikron Vision Model 120 Installation/Operation Manual | 69 |
