Installation
You must enter a passcode to access the Service menu.
Note
To access the motorized lens controls, use the FOCUS, ZOOM and LENS buttons on the Vision 120 remote control unit (described on page 14).
Alternatively, select Display Device from the Service Menu. Select Configure, then Lens from the Display Device menu. The Lens menu gives you a great deal of control over the picture size, position and focus:
3.10
Primary Lens Adjustments
To focus the projected image, use the cursor buttons to highlight “In” or “Out.” Then, press | Focus |
and hold the ENTER button on the remote control. |
|
To make the picture smaller (zoom out), use the cursor buttons to highlight the minus sign | Zoom |
| |
To enlarge the picture (zoom in), use the cursor buttons to highlight the plus sign (+). Then, |
|
press and hold the ENTER button on the remote control. |
|
To change the projected image position, use the cursor buttons to highlight “Left,” “Right,” | Vertical and Horizontal Lens |
“Up” or “Down” in the Lens menu. Then, press and hold the ENTER button to shift the image | Shift |
in that direction. |
|
Vidikron Vision Model 120 Installation/Operation Manual | 41 |
