Vidikron Vision 120

Installation

Vidikron Vision Model 120 Installation/Operation Manual 43

PRELIMINARY

3. Secure the Anamorphic Lens Holder to the plate using the Hex Bolts/Washers (item #6)

and Yaw/X Adjustment Levers that you removed in Step 1.

4. Use the Lens Mounting Screws to attach the Lens Adapter Ring (item #1) to the Pitch

Adjustment Yoke (item #2); see Figure 3-20. (Use the round, threaded holes on the yoke.)

5. Use the Height/Y Adjustment T-Screws (item #3), Pitch Adjustment T-Screws (item #4)

and T-Nuts (item #9) to attach the Pitch Adjustment Yoke and Lens Adapter Ring to the

Anamorphic Lens Holder. The Yoke should be as close to the primary lens as possible.

6. Attach the lens to the Lens Adapter Ring by threading it clockwise.

Figure 3-20. Attaching the Anamorphic Lens to the Lens Adapter Ring

Lens threads into ring

Contents

Main Page TWO YEAR LIMITED WARRANTY For Projectors, Video Processors and Controllers Page VIDIKRON PRODUCT INFORMATION RETAIN THIS INFORMATION FOR YOUR RECORDS Important Safety Instructions Compliance Information Page Page Page Page Page Page Page 1.1 About This Manual 1.2 Using This Manual DANGER! WARNING 1.3 Description, Features and Benefits Page 2.1 Vision 120 at a Glance 2. Controls and Functions 2.2 Vision 120 Rear Panel Page 2.3 VHD Controller Front Panel Page 2.4 VHD Controller Rear Panel 123 4 5 67 8 9 Page Controls and Functions 12 Vidikron Vision Model 120 Installation/Operation Manual 2.5 Vision 120 Remote Control Figure 2-5. Vision 120 Remote Control LIGHT OFF ON SOURCE PICTURE MEMORY ASPECT RATIO Page Page 3.1 Remote Control 3.2 Quick Setup Table 3-1. Installation Overview 3.3 Installation Considerations Table 3-2. Projector Installation Options Table 3-3. Vision 120 Lens Options and Throw Ratios Ceiling Installation Floor Installation Figure 3-4. Horizontal Lens Shift (EXAMPLE ONLY) Table 3-4. Vision 120 Vertical and Horizontal Lens Shift Limits 3.4 Installing the Primary Projection Lens Page 3.5 Installing the Optional CineWide Lens Mount Page Page Page Page Page 3.6 Mounting the Vision 120 3.7 Connections to the Vision 120 and VHD Controller Page Installation Vidikron Vision Model 120 Installation/Operation Manual 33 Digital (DTV) RGB or Component Video Connections: See Figure 3-12 and Figure 3-13. Figure 3-12. Digital (DTV) RGB or Component Video Connections (HD1, HD2) Figure 3-13. Digital (DTV) RGB or Component Video Connections (HD3) Page Page to Automation/ Control System or PC Page Installation Vidikron Vision Model 120 Installation/Operation Manual 39 ASPECT RATIO LIGHTOFF Connecting an External IR Receiver to the VHD Controller INPUTS C SYSTEM CONTROL INTERFACE RS-232 / 485 3.8 Turning on the Power 3.9 Adjusting the Picture Orientation V120 Component RCA 16:9 480I 3.10 Primary Lens Adjustments 3.11 Installing and Adjusting the CineWide Anamorphic Lens Page Page Page Page Wrong Position Correct Position Page Page Operation Figure 4-1. VHD Controller OSD Menu Structure for Vision 120 Input Source Calibration Memory Presets Input Position 7 Table 4-1. Aspect Ratio Settings Table 4-1. Aspect Ratio Settings (continued) Page Page Page Page 7 Page Page Page Page 5.1 Lamp Replacement WARNING 5.2 Filter Replacement 5.3 Troubleshooting Tips Table 5-1. Troubleshooting Chart Page 6.1 RS-232 Connection and Port Configuration 6.2 Serial Command Syntax Table 6-1. Serial Commands and Responses Table 6-1. Serial Commands and Responses (continued) Page 7.1 Vision 120 Specifications Table 7-1 lists the Vision 120 specifications. Table 7-1. Vision 120 Specifications Table 7-1. Vision 120 Specifications (continued) 7.2 VHD Controller Specifications Table 7-2 lists the VHD Controller specifications. Table 7-2. VHD Controller Specifications Specifications 74 Vidikron Vision Model 120 Installation/Operation Manual 7.3 Vision 120 Dimensions Figure 7-1 shows the Vision 120 dimensions (all dimensions are in inches). Figure 7-1. Vision 120/CineWide with AutoScope Dimensions 7.4 Supported Timings Table 7-3 lists the signal types supported by each input on the Vision 120. Table 7-3. Supported Signal Timings by Input Table 7-3. Supported Signal Timings by Input (continued)