Viking 56K manual Detected, No Answer

VIKING COMPONENTS 56K EXTERNAL MODEM USER’S GUIDE

Basic AT Command Set (Continued)

Command	Function
X1	Report basic call progress result codes and connections speeds (OK,
	CONNECT, RING, NO CARRIER (also, for busy, if enabled, and dial tone
	detected), NO ANSWER, CONNECT XXXX, and ERROR.
X2	Report basic call progress result codes and connections speeds, i.e., OK,
	CONNECT, RING, NO CARRIER (also, for busy, if enabled, and dial tone not
	detected), No ANSWER,
	CONNECT XXXX, and ERROR.
X3	Report basic call progress result codes and connection rate, i.e., OK,
	CONNECT, RING, NO CARRIER, NO ANSWER, CONNECT XXXX, BUSY, NO DIAL
	TONE and ERROR.
X4	Report all call progress result codes and connection rate, i.e., OK, CONNECT,
	RING, NO CARRIER, NO ANSWER, CONNECT XXXX, BUSY, NO DIAL TONE and
	ERROR.
Y0	Disable long space disconnect before on-hook.
Y1	Enable long space disconnect before on-hook.
Z0	Restore stored profile 0 after warm reset.
Z1	Restore stored profile 1 after warm reset.
&C0	Force RLSD active regardless of the carrier state.
&C1	Allow RLSD to follow the carrier state.
&D0	Interpret DTR ON-to-OFF transition per &Qn:
	&Q0, &Q5, &Q6 The modem ignores DTR.
	&Q1, &Q4 The modem hangs up.
	&Q2, &Q3 The modem hangs up.
&D1	Interpret DTR ON-to-OFF transition per &Qn:
	&Q0, &Q1, &Q4,.
	&Q5, &Q6 Asynchronous escape.
	&Q2, &Q3 The modem hangs up.
&D2	Interpret DTR ON-to-OFF transition per &Qn:
	&Q0 through &Q6 The modem hangs up.
&D3	Interpret DTR ON-to-OFF transition per &Qn:
	&Q0, &Q1, &Q4,.
	&Q5, &Q6 The modem performs soft reset.
	&Q2, &Q3 The modem hangs up.
&F0	Restore factory configuration 0.
&F1	Restore factory configuration 1.

30Chapter 6