Viking 56K manual Basic AT Commands, Guidelines, Basic AT Command Set

VIKING COMPONENTS 56K EXTERNAL MODEM USER’S GUIDE

6 Basic AT Commands

From terminal mode or command line, AT commands allow you to control your modem. If you are using your communications software to operate your modem, the software menus configure the AT commands. Follow the instructions in this chapter, to operate your modem directly from the terminal mode.

Guidelines

“AT”precedes most commands. Enter the AT commands exactly as they appear in the following Command column. The commands can be type in either upper or lower case letters, but cases should not be mixed. There can be up to a total of 40 characters in one command and spaces are not necessary. To activate a complete command string, press the “Enter”key.

Basic AT Command Set

Command	Function
A/	Re-execute command.
A	Go off-hook and attempt to answer a call.
B0	Select V.22 connection at 1200 bps.
B1	Select Bell 212A connection at 1200 bps.
C1	Return OK message.
Dn	Dial modifier.
E0	Turn off command echo.
E1	Turn on command echo.
H0	Initiate a hang-up sequence.
H1	If on-hook, go off-hook and enter command mode.
I0	Report product code.
I1	Report pre-computed.
I2	Report OK.

28Chapter 6