Fujitsu MPB3032AT, MPB3054AT, MPB3052AT, MPB3021AT, MPB3043AT

Table 5.4 Information to be read by IDENTIFY DEVICE command (2 of 3)

Word	Value	Description
89-127	X‘00’	Reserved
128	X‘00’	Security status not supported
129-159	X‘00’	Reserved
160-255	X‘00’	Reserved

*1	Word 0: General configuration
	Bit 15: 0 = ATA device					0
	Bit 14-8: Vendor specific					0
	Bit 7: 1 = Removable media device					0
	Bit 6:	1 = not removable controller and/or device				1
	Bit 5-1: Vendor specific					0
	Bit 0: Reserved					0
*2	Word 10-19: Serial number; ASCII code (20 characters, right-justified)
*3	Word 23-26: Firmware revision; ASCII code (8 characters, Left-justified)
*4	Word 27-46: Model number;
	ASCII code (40 characters, Left-justified), remainder filled with blank code (X'20')
	One of following model numbers;
	MPB3021AT, MPB3032AT, MPB3043AT, MPB3052AT, MPB3064AT
*5	Word 49: Capabilities
	Bit 15-14: Reserved
	Bit 13:	Standby timer value 0 = vendor specific
	Bit 12:	Reserved
	Bit 11:	IORDY support	1=Supported
	Bit 10:	IORDY inhibition	0=Disable inhibition
	Bit 9:	LBA support	1=Supported
	Bit 8:	DMA support	1=Supported
	Bit 7-0: Vendor specific
*6	Word 51: PIO data transfer mode
	Bit 15-8: PIO data transfer mode			X'02'=PIO mode 2
	Bit 7-0: Vendor specific
*7	Word 53: Enable/disable setting of word 54-58 and 64-70
	Bit 15-3: Reserved
	Bit 2:	Enable/disable setting of word 88			1=Enable
	Bit 1:	Enable/disable setting of word 64-70			1=Enable
	Bit 0:	Enable/disable setting of word 54-58			1=Enable

C141-E045-02EN

5 - 31