Viking 56K manual Software Installation, Mac OS 7.5.3 or Later

VIKING COMPONENTS 56K EXTERNAL MODEM USER’S GUIDE

Software Installation

Once the Viking fax/modem is installed, you will need to install the software nec- essary to communicate with the fax/modem. This section will cover the steps necessary to configure each of the operating systems. It includes instructions for the following operating systems:

•Mac OS 7.5.3 or Later

•Windows 95

•Windows 98

•Windows NT 4.0

Mac OS 7.5.3 or Later:

1.Insert the “Viking Modem Companion Software” CD into your computer’s CD- ROM drive. Once the CD appears on your system’s desktop, double-click on its icon to open. Locate the “Viking Modem Installer”icon on the CD and double-click on it to launch.

Note: If the CD can not be located,the drivers can be downloaded from the Viking

Components Web site at: www.vikingcomponents.com

3.Select “Viking 56K External Modem” by clicking on its button. Then click the “Install”button to begin the driver installation.

7Chapter 3