Cleaning and Maintenance

Cleaning the Interior Oven

Your Viking oven featuresan automatic,self-cleaningcycle. During this cycle, the oven reacheselevatedtemperatures in order to burn off soil and deposits. An integral smoke eliminator helps reduce odors associated with the soil burn-off. A powder ash residue is left in the bottomof the oven after completion of the Self-Clean Cycle.

The door latch is automaticallyactivatedafter selecting the Self- Clean setting. The latch ensures that the door cannotbe opened while the oven interioris at clean temperatures.

Before Using the Self-Clean Cycle:

Remove the oven racks and any other items/utensils from the oven. The high heat generatedduringthe cleaning cycle can discolor, warp, and damagethese items.

Do not use foil or liners in the oven duringthe Self-Clean Cycle.

Wipe off any large spillsfrom the oven bottomand sides.

Never use oven cleanersinside a self-cleaning oven or on raised portionsof the oven door.

Some areasof the oven must be cleanedby hand before the cycle begins. Soils in these areaswill be baked on and very difficult to clean if not removedfirst.

Clean the door up to the gasket, the door frame,and up to two inches inside the frame with detergent and hot water. Rinse thoroughly and dry.

WARNING

Burn or ElectricalShock Hazard

Make sure all controls are OFF and oven is COOL before cleaning. Failure to do so can result in burns or electrical shock.

Product Care

Cleaning and Maintenance

Using the Self-Clean Cycle

1.Close the door completely.

2.Select “UPPER OVEN” or “LOWER OVEN.” “SELECT MODE” will appear in the display for the selected oven.

3.Press “SELF CLEAN” from the oven function control panel.

4.Press “SET” or “ENTER.” At this time, “SELF CLEAN” will appear in the display. The door lock indicator light will remain on until the Self-Clean is completed or interrupted and the oven temperature drops to a safe temperature.

A complete cycle takes approximately 3 1/2 hours, with an additional 30 minutes needed for the oven to cool down enough for the door latch to disengage.

NOTE: A whirring fan noise will be heard during the Self- Clean Cycle and will continue to run for the 3 1/2 hour duration of the Self-Clean Cycle.

5.The timer will count down from 4 hours. When the cycle is completed, press the “OFF” button for the selected oven.

6.When the oven has completely cooled, open the door and remove any ash from the oven surfaces with a damp cloth.

7.To cancel or interrupt the self-cleaning cycle, press the “OFF” button for the selected oven.

CAUTION

Do not touch the exterior portions of the oven after self-cleaning cycle has begun, since some parts become extremely hot to the touch! During the first few times the self-cleaning feature is used, there may be some odor and smoking from the curing of the binder in the high-density insulation used in the oven. When the insulation is thoroughly cured, this odor will disappear. During subsequent self-cleaning cycles, you may sense an odor characteristic of high temperatures. Keep the kitchen well- vented during the self-cleaning cycle.

Product Care

52

53

Page 27
Image 27
Viking F20366B, DEDO530TSS manual Cleaning the Interior Oven, Before Using the Self-Clean Cycle, Close the door completely

DEDO527TSS, DEDO530TSS, F20366B specifications

The Viking F20366B, DEDO530TSS, and DEDO527TSS are three distinct models that showcase the latest advancements in modern design and technology, tailored for both efficiency and functionality. Each model caters to different user needs while offering impressive features and characteristics that enhance performance and usability.

The Viking F20366B stands out for its ergonomic design and robust construction. This model is equipped with advanced technology that ensures a reliable and powerful performance, making it suitable for various applications. The F20366B boasts a high-capacity engine that delivers exceptional torque, enhancing its ability to handle demanding tasks effortlessly. Its lightweight structure also contributes to its maneuverability, allowing users to navigate tight spaces with ease. Additionally, the model features an intuitive control interface, making it user-friendly for both novices and experienced operators alike.

On the other hand, the DEDO530TSS is engineered specifically for precision and efficiency. This model incorporates cutting-edge technology that optimizes energy consumption while delivering high performance. The DEDO530TSS features a state-of-the-art electronic control system that enables users to adjust settings seamlessly, ensuring they achieve the desired results with minimal effort. Its advanced safety features also rank high in importance, providing peace of mind during operation. Furthermore, the DEDO530TSS is designed for durability, with high-quality materials that withstand wear and tear over time.

Finally, the DEDO527TSS represents a blend of versatility and strength. This model is ideal for users who require a heavy-duty option capable of handling a wide range of tasks. One of its standout characteristics is its multifunctionality, allowing it to adapt to various applications without compromising on performance. The DEDO527TSS is also known for its user-centric features, including adjustable components and an easy-to-navigate interface, which facilitate smoother operation.

In summary, the Viking F20366B, DEDO530TSS, and DEDO527TSS are exemplary models that reflect the evolution of technology in their respective categories. With their unique features, robust designs, and user-friendly characteristics, they cater to diverse needs and applications, making them valuable choices for both professional and personal use.