Viking DEDO530TSS Clock Format, Sabbath Mode, Showroom Mode, Tone Name Number Duration of Tones

Programming Modes

Oven Settings

To change the duration of a Timeout:

1.Press “SETTINGS”. Settings menu will appear in display.

2.Press the up or down arrows until “TIMEOUTS…” appears in the display.

3.Press “ENTER” and “RESTORE FACTORY DEFAULTS”: NO” will appear on the display.

4.Scroll up or down using the arrow keys to find the timeout you would like to change and press “ENTER.” Display will flash and appear as follows:

“1 Minute Left: 1 X 1 sec”

Tone Name	Number of	Duration of Tones
	Tones	(in seconds)

5.Using the numeric keyboard, enter the number of seconds desired.

6.Press “ENTER” when finished. Timeout is customized to your preference.

7.To exit the Settings menu, press “SETTINGS.”

Clock Format

This feature allows users to choose a 12-hour or 24-hour format for the clock display.

To program the clock format:

1.Press “SETTINGS.” Settings menu will appear in display.

2.Press up and down arrows until “12 or 24 HOURS: 12” appears in the display.

3.Press “ENTER” and the current setting will flash in the display.

4.Use arrow keys to choose “12” or “24.”

5.Press “ENTER” again to accept desired clock format.

6.To exit the Settings menu, press “SETTINGS.”

5.Push “SET” button.

6.Use the up arrow to toggle between “YES” and “NO”.

7.Select “YES” and push “SET” button.

8. To exit the “SETTINGS” menu, press “SETTINGS”.

Oven Settings

Sabbath Mode

This mode offers users belonging to religions with “no work” restrictions to program their ovens to comply with the Sabbath requirement. When the oven door is opened in Sabbath mode, the oven light stays off while the convection fan and heating elements remain on.

To program the Sabbath mode:

1.Press “SETTINGS”. Settings menu will appear in display.

2.Press up or down arrows until “SABBATH: NO” appears in the display.

3.Press “ENTER,” and “NO” will flash on display.

4.Use arrow keys to choose “YES” or “NO.”

5.Press “ENTER” again to accept Sabbath mode.

6.To exit the Settings menu, press “SETTINGS.”

Showroom Mode

This mode allows the oven to be hooked up to a 120 volt electrical supply for display or showroom mode purposes. In this mode, the electronic display/controls and oven lights will function but the heating elements and convection fan will NOT function.

To program the Showroom mode:

1.Press “SETTINGS”. Settings menu will appear in display.

2Use the down arrow to scroll to “TIMEOUTS”.

3.At “TIMEOUTS” mode, hold the down arrow for 5 seconds.

4.Use the down arrow to scroll to “SHOWROOM”.

5.Push “SET” button.

6.Use the up arrow to toggle between “YES” and “NO”.

7.Select “YES” and push “SET” button.

8.To exit the “SETTINGS” menu, press “SETTINGS”.

Programming Modes

24 25