TROUBLESHOOTING YOUR FITNESS BIKE
Our Bikes are designed to be reliable and easy to use. If, however, you have a problem, these troubleshooting steps may indicate the cause.
PROBLEM: The Console does not light up.
SOLUTION: 1) Check to make sure the Bike is turned on (switch is located near power supply).
2)If you are using the Bike without a power supply, be sure you are pedaling fast enough to power the Console. If the problem persists, plug in the power supply, turn the Bike on and test to see if the Console powers up.
PROBLEM: The Bike is making a clicking noise.
SOLUTION: Using the supplied 15MM wrench, remove both the right and left pedals, apply grease to the threaded portion of the pedals and reassemble the unit, making sure the pedals are as tight as possible.
PROBLEM: The Bike appears to work but there is no resistance change.
SOLUTION: The magnetic brake assembly is not working properly; please contact your retailer.
PROBLEM: The Bike makes a squeaking or creaking noise.
SOLUTION: Check and tighten all the bolts on the Bike again.
NOTE: If the above steps do not remedy the problem, discontinue
16use, turn the power off and contact your retailer.
E 3 6 0 0 H R C
