Vivotek IP8162 manual Vivotek

VIVOTEK

olicy	imagequality		rate is not sufficient to satisfy current
			encoded conditions.
			“framerate” indicates frame rate first.
			“imagequality” indicates image quality
			first.
s<0~(m-1)>_h264_ratecont	cbr, vbr	4/4	cbr, constant bitrate
rolmode			vbr, fix quality
s<0~(m-1)>_h264_quant	1~5	4/4	Quality of video when choosing vbr in
	99, 100		“ratecontrolmode”.
			99 is the customized manual input
			setting.
			1 = worst quality, 5 = best quality.
			100 is percentage mode.
s<0~(m-1)>_h264_qvalue	0~51	4/4	Manual video quality level input.
			(s<0~(m-1)>_h264_quant = 99)
s<0~(m-1)>_h264_qpercen	1~100	4/4	Manual video quality level input.
t			(s<0~(m-1)>_h264_quant = 100)
s<0~(m-1)>_h264_bitrate	1000~160000	4/4	Set bit rate in bps when choosing cbr in
	00		“ratecontrolmode”.
s<0~(m-1)>_h264_maxfra	1~25,	1/4	Set maximum frame rate in fps (for
me	26~30 (only		h264).
	for NTSC or
	60Hz CMOS)
s<0~(m-1)>_h264_profile	0~2	1/4	Indicate H264 profiles
<product dependent>			0: baseline
			1: main profile
			2: high profile
s<0~(m-1)>_mjpeg_bitrater	average,	4/4	“average” indicates the average bit rate
estriction	upperbound		will be equal to its target bit rate.
			“upperbound” indicates the bit rate will
			always not exceed its target bit rate.
s<0~(m-1)>_mjpeg_priority	framerate,	4/4	The policy to apply when the target bit
policy	imagequality		rate is not sufficient to satisfy current
			encoded conditions.
			“framerate” indicates frame rate first.
			“imagequality” indicates image quality
			first.
s<0~(m-1)>_mjpeg_ratecon	cbr, vbr	4/4	cbr, constant bitrate
trolmode			vbr, fix quality
s<0~(m-1)>_mjpeg_quant	1~5	4/4	Quality of JPEG video.

User's Manual - 139