Vivotek IP8162 manual PTZ PTZ settings, Digital PTZ Operation E-PTZ Operation

VIVOTEK

PTZ > PTZ settings

Advanced Mode

This section explains how to control the Network Camera’s Pan/Tilt/Zoom operation. There are two ways to enable the function:

1.Digital: Control the e-PTZ operation. It allows users to quickly move the focus to a target area for close-up viewing without moving the camera physically. Please refer to below for detailed instruction.

2.Mechanical: Connect the Network Camera to a PTZ driver or scanner via RS485 interface.

Digital PTZ Operation (E-PTZ Operation)

If you select “Digital“, the e-PTZ control settings section will be displayed as shown below:

2010/12/10 17:08:56

Select Stream: Select one of the stream 1~3 to set up the e-PTZ control. Please note that each stream can posses its own preset and patrol settings. For detailed information about how to set up preset and patrol settings, please refer to page 86.

User's Manual - 83