VIVOTEK
162 - User's Manual
trigger boot,
di,
motion,
seq,
recnotify,
tampering,
visignal,
vi
6/6 Indicate the trigger condition:
“boot” = System boot
“di”= Digital input
“motion” = Video motion detection
“seq” = Periodic condition
“visignal” = Video input signal loss.
“recnotify” = Recording notification.
“tampering” = Tamper detection.
“vi”= Virtual input (Manual trigger)
triggerstatus String[40] 6/6 The status for event trigger
di <integer> 6/6 Indicate the source id of di trigger.
This field is required when trigger condition is “di”.
One bit represents one digital input. The LSB
indicates DI 0.
mdwin <integer> 6/6 Indicate the source window id of motion detection.
This field is required when trigger condition is “md”.
One bit represents one window.
The LSB indicates the 1st window.
For example, to detect the 1st and 3rd windows, set
mdwin as 5.
mdwin0 <integer> 6/6 Similar to mdwin. The parameter takes effect when
profile 1 of motion detection is enabled.
vi <integer> 6/6 Indicate the source id of vi trigger.
This field is required when trigger condition is “vi”.
One bit represents one digital input. The LSB
indicates VI 0.
inter 1~999 6/6 Interval of snapshots in minutes.
This field is used when trigger condition is “seq”.
weekday 0~127 6/6 Indicate which weekday is scheduled.
One bit represents one weekday.
bit0 (LSB) = Saturday
bit1 = Friday
bit2 = Thursday
bit3 = Wednesday
bit4 = Tuesday
bit5 = Monday
bit6 = Sunday
For example, to detect events on Friday and Sunday,
set weekday as 66.