Vivotek IP8162 manual Vivotek

VIVOTEK

	capability_vide
	oin_resolution
s<0~(m-1)>_mpeg4_intrap	250, 500,	4/4	Intra frame period in milliseconds.
eriod	1000, 2000,
	3000, 4000
s<0~(m-1)>_mpeg4_bitrate	average,	4/4	“average” indicates the average bit rate
restriction	upperbound		will be equal to its target bit rate.
			“upperbound” indicates the bit rate will
			always not exceed its target bit rate.
s<0~(m-1)>_mpeg4_priorit	framerate,	4/4	The policy to apply when the target bit
ypolicy	imagequality		rate is not sufficient to satisfy current
			encoded conditions.
			“framerate” indicates frame rate first.
			“imagequality” indicates image quality
			first.
s<0~(m-1)>_mpeg4_rateco	cbr, vbr	4/4	cbr, constant bitrate
ntrolmode			vbr, fix quality
s<0~(m-1)>_mpeg4_quant	1~5	4/4	Quality of video when choosing vbr in
	99, 100		“ratecontrolmode”.
			99 is the customized manual input
			setting.
			1 = worst quality, 5 = best quality.
			100 is percentage mode.
s<0~(m-1)>_mpeg4_qvalue	2~31	4/4	Manual video quality level input.
			(s<0~(m-1)>_mpeg4_quant = 99)
s<0~(m-1)>_mpeg4_qperce	1~100	4/4	Manual video quality level input.
nt			(s<0~(m-1)>_mpeg4_quant = 100)
s<0~(m-1)>_mpeg4_bitrate	1000~160000	4/4	Set bit rate in bps when choosing cbr in
	00		“ratecontrolmode”.
	<product
	dependent>
s<0~(m-1)>_mpeg4_maxfr	1~25,	1/4	Set maximum frame rate in fps (for
ame	26~30 (only		MPEG-4).
	for NTSC or
	60Hz CMOS)
s<0~(m-1)>_svc_intraperio	250, 500,	4/4	Intra frame period in milliseconds.
d	1000, 2000,
	3000, 4000
s<0~(m-1)>_svc_svclayer	3	1/4	SVC temporal layer.
s<0~(m-1)>_svc_svcsyntax	0~1	1/4	Enable SVC syntax or not.

User's Manual - 137