VIVOTEK
User's Manual - 43
Picture settings
On this page, you can tune the White balance, Image adjustment and WDR enhanced �
White balance: Adjust the value for the best color temperature.
■ Auto: It will automatically adjust the color temperature of the light in response to different light
sources�
You may follow the steps below to adjust the white balance to the best color temperature�
1� Set the White balance to Auto�
2� Place a sheet of white paper in front of the lens, then allow the Network Camera to adjust the
color temperature automatically�
3� Check Fix current value to conrm the setting while the white balance is being measured.
■ Manual: This item allows user to input the R gain & B gain manually.
Image Adjustment
■ Brightness: Adjust the image brightness level, which ranges from -5 to +5.
■ Contrast: Adjust the image contrast level, which ranges from -5 to +5. Please note that this
function will be disabled if you enable WRD enhancement in the column below�
■ Saturation: Adjust the image saturation level, which ranges from -5 to +5. You can also select
Customize and manually enter a value�
■ Sharpness:
Adjust the image sharpness level, which ranges from -3 to +3�
You can also select
Customize and manually enter a value�
■ Gamma curve: This function is for user to
select a proper gamma curve value to adjust the gray-
scale of the monitor�
Sensor Setting 2:
For special situations
Sensor Setting 1:
For normal situations