VIVOTEK
There are three types of rules:
Single: This rule allows the user to add an IP address to the Allowed/Denied list. For example:
192.168.2.1
Network: This rule allows the user to assign a network address and corresponding subnet mask to the Allow/Deny List. The address and network mask are written in CIDR format.
For example:
IP address 192.168.2.x will be bolcked.
Range: This rule allows the user to assign a range of IP addresses to the Allow/Deny List.
Note: This rule is only applied to IPv4. For example:
Administrator IP address
Always allow the IP address to access this device: You can check this item and add the Administrator’s IP address in this field to make sure the Administrator can always connect to the device.
80 - User's Manual
