VIVOTEK
User's Manual - 89
Custom command
If Custom Camera (pan/tilt head or scanner) is selected as the PTZ driver, the Preset Position and
PTZ Control Panel on the main page will be disabled� You will need to configure command buttons
to control the PTZ scanner� Click Custom Command to open the Custom Command page to set the
commands in the Control Settings session. Please refer to your PTZ scanner user's manual to enter the
commands in the following elds. Click Save to enable the settings and click Close to exit the page�
►If you select DynaDome/SmartDOME, Lilin PIH-7x00, or Pelco D protocol as the PTZ driver, the
Control Settings column will not be displayed�
►For all PTZ drivers, a total of ve additional command buttons can be congured.
►The command buttons will be displayed on the main page:
2010/12/10 17:08:56
NOTE: