Telephone operation
Transfer/share a call using intercom
During a call, press MeNU/SeLeCT twi ce to choose >Intercom. The
outside call is put on hold automatically.
If you have a two-handset system, your handset screen shows Calling
other handset.
If you have more than two handsets, your screen shows
INTerCOM TO:. Use the dialing keys to enter the destination handset
number. Your handset screen shows Calling handset X.
The destination handset rings and its screen shows Ot her handset is
calling or handset X is calling.
To answer the intercom call, press /FLASh, or any of the dialing
keys (0-9, #, TONe ) on the destination handset. Both handsets now
show Intercom. You can now have a private conversation between the
system handsets.
3. From this intercom call, you have the following o ptions:
To transfer the call, press MeNU/S eLeCT twice on
the originating handset to choose >Transfer. The
originating handset screen shows Call transferr ed.
The destination handset is automatically connected
to the outside call.
To share the call, press MeNU/Se LeCT on the originating handset and
then press /VOL or VOL/CID to highlight >Share call. Then press
MeNU/SeLeCT. Both originating and destination hand sets are connected
to the outside call.
To end the outside call, press OFF/CLeAr or place the handset in the
telephone base or charger. The call will not end until all handsets hang up.
1.
•
•
2.
•
•
4.
If you want to cancel an intercom call and reco nnect to the outside call
before the destination handset answers, pre ss /FLASh or OFF/CLeAr on
your originating handset.
If the destination handset does not answer th e intercom call within 100
seconds, is in the directory or cal l log, or is out of range, your originating
handset screen shows
Unable to call. Try again and reconnec ts to the
outside call automatically.
•
•
>Transfer
Share call
26