Getting started
Installation options
Your telephone base is ready for tabletop use. If you want to mount your telephone on a wall, use the provided wall mount bracket to connect with a standard
Tabletop to wall mount installation
1.Plug one end of the telephone line cord into the TEL LINE jack on the bottom of the telephone base. Plug the small end of the power adapter into the POWER jack on the bottom of the telephone base.
2.Position the telephone base as shown below. Insert the extended tabs [B] of the wall mount bracket into the slots [A] on the back of the telephone base. Push the telephone base down until it clicks securely in place.
3.Route the telephone line cord through the wall mount bracket hole and plug it into the telephone wall jack. Route the power cord out of the bottom of the telephone and plug it into an electrical outlet not controlled by a wall switch.
4.Align the holes on the bracket with the standard wall plate and slide the bracket down until it locks securely. Bundle the telephone line cord and power adapter cord neatly with a twist tie.
1 | 2 |
[B] [B] [A] [A]
3 | 4 |
