Telephone operation
end PTT
For one-to-one PTT, both initiating and destination handsets c an end PTT.
For one-to-all PTT, the initiating handset can end the PTT ca ll for all
handsets on the PTT call. If any one of the destination hands ets leaves the
PTT call, the call continues until all partici pants or the initiator hangs up.
To end or leave PTT:
Press OFF/CLeAr or place the handset in the telephone b ase or charger. The
handset screen shows Push to talk ended.
Answer an incoming call during PTT
If you receive an incoming outside call during PTT, there is an aler t tone.
During a one-to-one PTT, press /FLASh on the initiating or destination
handset. The PTT call ends automatically and the ou tside call is answered.
During a one-to-all PTT, press /FLASh on the initiating handset. The PTT
call ends automatically and the outside call is answered.
During a one-to-all PTT, press /FLASh on any one of the destination
handsets. The PTT call continues for the rest of the PT T participants. Your
handset answers the outside call.
To leave the PTT call without answering the incoming call, press
OFF/CLeAr. The telephone continues to ring.
•
•
•
•
31
After PUSh TO TALK is released, the PTT call rem ains open for a short
time. If no one presses PUSh TO TALK within 10 seconds, the P TT call
ends automatically.
Make an outgoing call during PTT
During a one-to-one PTT, press /FLASh to get a dial tone. The PTT call
ends automatically.
During a one-to-all PTT, press /FLASh on the initiating handset. The PTT
call ends automatically and you get a dial tone.
During a one-to-all PTT, press /FLASh on any one of the destination
handsets. The PTT call continues for the rest of the PT T participants. Your
handset gets a dial tone.
•
•
•