Telephone base and charger installation
Install the telephone base and charger(s) as shown below.
Make sure that the electrical outlet is not controlled by a wall switc h.
If you subscribe to DSL (digital subscriber line) high-speed Internet se rvice
through your telephone line, you must install a DSL lter between the
telephone line cord and the telephone wall jack. The lter prevents no ise and
caller ID problems caused by DSL interference. Contact your DSL ser vice
provider for more information about DSL lters.
Telephon e base
Telephon e
wall jac k
Charger
Use only the power adapters supplied with this product. To order a replacement,
visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada,
go to www.vtechcanada.com or dial 1 (800) 267-7377.
The power adapters are intended to be correctly oriented in a vertical or
oor mount position. The prongs are not designed to hold the plug in place if
it is plugged into a ceiling, under-the-table or cabinet outlet.
•
•
Getting started
Electrical outlet
not controlled by
a wall switch
If you h ave DSL
high sp eed
Interne t serv ice,
a DSL fi lter
(not inc luded ) is
require d.
Telephon e
line co rd Telephon e
base po wer
adapter
Charger
adapter
2