BASE UNIT FEATURES
BASE LED INDICATORS
POWER LED
Glows when the AC adaptor is supplying power to the Base Unit.
CHARGE LED
Glows when the Handset is placed in the Base Unit cradle to charge.
SPARE BATTERY LED
Glows when the (optional) battery pack is installed in spare battery compartment in the Base Unit.
INTERCOM LED
Glows when the Base Unit has entered the INTERCOM mode with the Handset.
MUTE LED
Glows when the MUTE key has been pressed, indicating that the Base Unit microphone has been temporarily disabled.
LINE 1 (EXTENSION IN USE) LED Glows steadily when the Base Unit is accessing LINE 1.
Flashes slowly when only the Handset or an extension phone is accessing LINE 1.
Flashes rapidly when LINE 1 is placed on HOLD.
Flashes in cadence with the incoming ring when you receive a call.
LINE 2 (EXTENSION IN USE) LED Glows steadily when the Base Unit is accessing LINE 2.
Flashes slowly when only the Handset or an extension phone is accessing LINE 2.
Flashes rapidly when LINE 2 is placed on HOLD.
Flashes in cadence with the incoming ring when you receive a call.
LINE 1 KEY
Press this key to access or FLASH LINE 1.
During CONFERENCE mode, pressing this key will maintain access to LINE 1 while placing LINE 2 on HOLD.
LINE 2 KEY
Press this key to access or FLASH LINE 2.
During CONFERENCE mode, press- ing this key will maintain access to LINE 2 while placing LINE 1 on HOLD.
OFF KEY
Press this key to disconnect the Base Unit during any of the following conditions:
1.The Base Unit is on LINE 1 or 2
2.The Base Unit is CONFERENCING LINES 1 and 2
3.The Base is in INTERCOM mode.
NOTE: Pressing this key affects the Base Unit only. Also, pressing OFF will not disconnect a call which the Base Unit has placed on HOLD.
17
