ADVANCED OPERATIONS
Programming the Base Unit Ringer
1.Press and hold the MEM/PROG key until the LCD displays
PROGRAM LOCATION _ _.
2.Press #. LCD displays
?: 1=HANDSET 2=BASE.
3.Press 2. LCD displays
?: 1=LINE 1 2=LINE 2.
4.Press 1 (or 2, depending on which line you’re programming).
5.Press 1,2,3, or 4. The Base Unit will generate the tone you’ve se- lected. Press any of the other ringer selections (1,2,3,4) to compare the different tones.
6.Once you have selected a ringer tone, press OFF.
To turn the Base Unit ringer OFF, locate the L1 RINGER and L2 RINGER ON/OFF switches, on the
NOTE: Adjusting the Base Unit ringer switches does not affect the Handset ringer settings.
MEMORY DIALING
Your VT 2960 can store 20 phone num- bers in memory. Each phone number can contain up to 20 digits.
Programming Phone Numbers into Memory
1.With the Handset OFF, enter the tel- ephone number you wish to store. View the number on the LCD to make sure you’ve entered it correctly. If you’ve made a mistake, either press and hold the CONF/CLEAR key to erase the entire string of numbers, or press and hold the INT.COM/DEL key, which will backspace your entry, one digit at a time.
2.Press and hold MEM/PROG.
The LCD displays PROGRAM LO-
CATION _ _.
3.Enter a
If the LCD displays PROGRAMMING INCOMPLETE,repeat STEPS
Storing a Phone Number from
REDIAL
1.With the Handset OFF, press REDIAL. The last phone number you called will be displayed on the LCD.
2.Press and hold MEM/PROG. The LCD displays PROGRAM LOCA-
TION _ _.
3.Enter a
Storing a Pause in a Phone Number
To insert a pause when programming a phone number into memory, press the HOLD/PAUSE key at the appropriate point in the number sequence. A P will be displayed on the LCD, and is treated as a stored digit. The pause is approxi- mately 2 seconds. For a longer pause, press HOLD/PAUSE two or more times.
For example, to store
1.Press 9
2.Press HOLD/PAUSE
3.Enter 5551234
4.Press and hold MEM/PROG
5.Enter 08
25
