CID-CALLER ID
Caller ID data transmission is incomplete. If this display appears often, contact your local service provider.
DELETING CID RECORDS
Your VT 2960 stores the most recent 50 CID records in memory. When CID memory is completely filled, the oldest record is automatically deleted as a new call is stored. Therefore, you do not have to delete CID records manually. However, if you want to delete CID records, follow the steps listed below:
Deleting a single CID record
1.With the Handset OFF, press the CID key. The most recent call will be dis- played on the LCD (Call #01).
2.Press the * (
) or # ( 
)keys to scroll to the desired record.
3.Press and hold the INT.COM/DELETE key until the LCD displays
DELETING SINGLE CALL.
4.If you have other records to delete, scroll to the desired record and repeat the process.
5.Press OFF when done.
Deleting ALL CID records
1.With the Handset OFF, press the CID key. The most recent call will be dis- played on the LCD (Call #01).
2.Press and hold the CONF/CLEAR key until the LCD displays DELETE ALL? DEL TO ALLOW.
3.Press INT.COM/DELETE to confirm deletion of all CID records. The LCD will display DELETING ALL CALLS. Pressing any key other than INT.COM/DELETE cancel this op- eration.
DIALING FROM CID MEMORY
NOTE: Only the last 7 digits of the phone number will be dialed from CID memory. You can manually append additional digits (“1” plus area code, for example) to the number prior to dialing.
1.With the Handset OFF, press CALLER ID.
2.Use the * ( 
) or # ( 
) keys to scroll to the desired CID record.
3.Press the desired LINE key.The number associated with the CID record willbe dialed (last 7 digits only).
Adding digits for CID dialing For example, if the CID record is:
only
8981, do the following:
1.With the Handset OFF, enter 1503.
2.Press CID.
3.Use the * ( 
) or # ( 
) key to scroll to the CID record.
4.Press the desired LINE key. The number dialed will include the long distance “1” plus the area code.
28
