VTech VT 2960 Setting the Number of Rings, Number of Rings selected is, Call Screening

THE VT2960 ANSWERING SYSTEM

SETTING THE NUMBER OF RINGS

For each line, the answering system can answer calls after 2, 4 or 6 rings; or Toll Saver.

Toll Saver is a feature which, when selected, will command the answering system to answer an inbound call after 2 rings only if there are new, unplayed messages in memory. Otherwise, the answering system will answer after 4 rings. The purpose of this feature is to assist you in avoiding long distance charges when calling your VT2960 from a remote location to retrieve messages. If the VT2960 does not answer after 2 rings, you can hang up. There aren't any new messages. To set the number of rings:

1.Press MENU. Voice prompt says, "Please select line."

2.Press SELECT to choose the desired line.

3. P r e s s T I M E / S E T t o h e a r confirmation of your line choice, followed by " S e t o u t g o i n g message."

4.Press MENU three times, until voice prompt says, "Set number of rings."

5.Press SELECT to choose between 2, 4, 6 rings, or Toll Saver.

6.Press TIME/SET to confirm your

choice. Voice prompt will say,

"Number of Rings selected is

_________."

Press MENU to advance to the next programming function, or press STOP/ PLAY to exit programming mode.

			SETTING THE NUMBER OF
		MENU	RINGS
	VT 2960	SELECT
		TIME/SET	PRESS MENU .
			PRESS SELECT TO CHOOSE
	L2	MSG	LINE 1 OR 2.
		MSG
		SELECT
	ANSWER
	L1
	MSG		PRESS TIME/SET TO CONFIRM
	STOP/PLAY	ON/OFF
ANSWER
AT	SKIP		LINE.
		RECORD/
		MEMO
	VOLUME		PRESS MENU	THREE TIMES
			FOR "SET NUMBER OF RING:
HOLD	MUTE	CONF.
			PRESS SELECT	TO CHOOSE
	LINE 2	OFF	NUMBER OF RINGS.

PRESS TIME/SET TO CONFIRM

SELECTION.

The following programming affects both lines, simultaneously:

•Call Screening

•Audible Message Alert

•Day and Time

CALL SCREENING

This feature allows you to hear incoming messages at the Base Unit, while they are being recorded. To program Call Screening:

1.Press MENU twice. Voice prompt says, "Set Call Screening."

2.Press SELECT to choose "ON" or "OFF"

3.Press TIME/SET to confirm your selection ("Call Screening is ___")

				CALL SCREENING
			MENU
		VT 2960	SELECT	PRESS MENU TWICE FOR
			TIME/SET	"SET CALL SCREENING".
		L2		PRESS SELECT TO CHOOSE
			MSG	"ON" OR "OFF".
			MSG
		ANSWER	SELECT
	L1
	MSG
ANSWER
AT	STOP/PLAY	SKIP	ON/OFF
			RECORD/
			MEMO
	VOLUME
HOLD	MUTE	CONF.		PRESS TIME/SET TO CONFIRM
				SELECTION.
	LINE 2		OFF

4.Press MENU to advance to the next programming function, or press STOP/PLAY to exit programming mode.

32