VTech VT 2960 YOU Hear Other Calls While Using Your Phone, Make sure the power cord is plugged

IN CASE OF DIFFICULTY

YOUR CALLER FADES IN AND OUT. You may be nearly out of range. Move closer, or relocate the base.

YOU HEAR OTHER CALLS WHILE USING YOUR PHONE.

•Replace the Handset in the base cra- dle, wait a few moments and try again.

•Disconnect your Base Unit from the telephone jack, and plug in a regular telephone. If you still hear other calls, the problem is probably in your wir- ing or local service. Call your local telephone company.

YOU HEAR NOISE IN THE HANDSET, AND NONE OF THE KEYS OR BUT- TONS WORK.

•Make sure the power cord is plugged in.

•Your Base Unit and Handset may not be operating on the same channel or security code. Place the Handset in the cradle for a few moments to reload the security code and reset the channel.

COMMON CURE FOR ELECTRONIC EQUIPMENT

Electronics, like people, can sometimes get confused. If the unit does not seem to be responding normally, then try putting the Handset in the cradle to re-initialize the unit. If it still does not seem to respond, perform the following steps (in the order listed):

1.Disconnect the power to the Base Unit.

2Remove the Handset battery Pack

3.Wait a few minutes.

4.Connect power to the Base Unit.

5.Install the Handset battery pack.

6.Watch for the Handset to display

“FOUND CHANNEL X”.

39