WatchGuard Technologies WatchGuard SOHO and SOHO | tc Performing manual installation

Models: WatchGuard SOHO and SOHO | tc

1 80
Download 80 pages 51.04 Kb
Page 14
Image 14

Performing manual installation

An operational Internet connection.

Setup of your SOHO requires access to the Internet. If your connection does not work, please contact your Internet service provider (ISP). When your connection has been established, you may proceed with installation and setup.

If you have either a cable or DSL modem, consult the manual that came with your service, or call the ISP to find out whether your particular modem supports DHCP or PPPoE. You will need this information later in the installation process.

If you are using PPPoE to connect to your local Internet service provider, the WatchGuard SOHO must be running firmware version 2.0 or later.

An installed Web browser–either Netscape Navigator 4.5 (or higher) or Internet Explorer 4.0 (or higher).

SOHO serial number.

Performing manual installation

Before you begin the installation process, connect to the Internet. You need to determine your current TCP/IP settings and disable your HTTP proxy.

Determine your current TCP/IP settings

For your reference, record the your computer’s current TCP/IP settings in the chart provided at the end of this section. Different operating systems will supply different information. To locate your settings:

2

Page 14
Image 14
WatchGuard Technologies WatchGuard SOHO and SOHO | tc Performing manual installation