Frequently asked questions

OK, ping is not working.

If you cannot ping the local network address of the remote SOHO, take the following steps to classify the problem:

1Ping the public address of the remote SOHO.

For example, at Site A, ping 68.130.44.15 (Site B). You should get a reply. If not, verify the Public Network Settings of Site B. If they are correct, verify that computers at Site B can access the internet. If you are still having trouble, contact your ISP.

2Once you can ping the public address of each SOHO, try

pinging the local address.

From Site A, ping 192.168.112.1. If the tunnel is up, you should get a reply from the remote SOHO. If not, re-check the Local Settings page. Make sure that the local DHCP addresses ranges do not overlap. For example, IP addresses on either side of the tunnel must not be the same.

How do I obtain a VPN Feature Key?

Feature keys come inside the box when you buy a WatchGuard SOHOtc. They can also be purchased online at:

http://www.watchguard.com/sales/buyonline.asp

How do I enable a VPN Tunnel?

Full instructions for enabling a VPN tunnel can be found online:

http://www.watchguard.com/support/interopvpn.asp

User Guide 2.3

49

Page 61
Image 61
WatchGuard Technologies WatchGuard SOHO and SOHO | tc manual OK, ping is not working, How do I obtain a VPN Feature Key?