![](/images/new-backgrounds/1300182/30018283x1.webp)
Troubleshooting installation and network configuration
3Click VPN Configuration.
4Click Configuring a SOHO to SOHO IPSec VPN Tunnel.
5Download and follow the instructions to configure your VPN tunnel.
TECHNICAL
How do I reboot my SOHO?
1Using your Web browser, go to http://192.168.111.1.
2Click System Information.
3Click Features and Version Information.
4Click Reboot and wait for the SOHO to finish rebooting. The MODE light on the front of the SOHO will turn off, then back
on.
You can also reboot by removing the power source for ten seconds, and then restoring power.
How do I set up my SOHO for remote configuration?
This requires the
https://www.watchguard.com/products/vpnmanager.asp
For more information on how to remotely configure a SOHO, see the VPN Manager Guide.
How do I reset the SOHO to factory defaults?
To reset the SOHO to factory settings, disconnect the power, disconnect all cables, plug one end of an Ethernet cable into the WAN port and the other end into any LAN port, connect power, wait 90 seconds, and disconnect power. Your SOHO is now reset to
30