Wayne-Dalton 9700 installation instructions Center Bracket Bushing

15	Center Bracket Bushing
Tools Needed:	NOTE: If you are installing the idrive®
None	opener with your garage door, skip this step
	and go to your idrive® Installation Instructions
Step Ladder
	and Owner’s Manual. After completing steps
	1-13 of your idrive® Installation Instructions
	and Owner’s Manual, rear supports will need
	to be fabricated/installed to support both
	horizontal tracks, see step 27.
	NOTE: If you are not installing the
	idrive® opener on your garage door, you must
	install the center bracket bushing assembly.
	Being cam shaped the center bracket
	bushing only fits one way. Slide the center
	bracket assembly towards the center of the
	TorqueMaster® spring tube, from the right
	side as shown.

CENTER

BRACKET

ASSEMBLY

TorqueMaster®

Spring Tube

TorqueMaster®

Spring Tube

CENTER

BRACKET

BUSHING

16Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com