Wayne-Dalton 9700 installation instructions Package Contents

Package Contents

NOTE: Depending on the door model, some parts listed will not be supplied if not necessary. Rear supports may or may not be included with your door.

DOOR Sections (as required)

(1)TorqueMaster® Spring tube

(2)Horizontal Tracks RH/LH

(2) Quick Install RH/LH

Flagangles (as required)

(2)Fully Adjustable RH/LH Flagangles (As Required)

Q.I. Jamb Brackets

(as required)

U-bar

(As required)

(1)Center Bracket Assembly

1/4”- 20 Flanged Hex Nuts (as required)

(2)3/8”- 16 Hex Nuts (As required)

(2) Horizontal Angles

Rollers

Right & left

End Brackets

1/4”-14 x 5/8” Self Tapping

Screws (as required)

(2)3/8”-16 x 3/4” Truss Head Bolts

(As required)

(2) Top Bracket Bases (2) Top Bracket Slides

operator bracket	Right and left cable drum/
	drum wrap assemblies

(1) Loose Winding Shaft	Pull rope
(SINGLE SPRING only)
	(If included)

1/4”-20 x 11/16” Self Drilling	1/4”-14 x 7/8” Self
Screws (as required)	Drilling Screws
	(As required)

stud plate	5/16”x 1-1/4” Clevis PIN &
(as required)	COTTER PIN
	(as required)

(2) Vertical

Tracks RH/LH

Weather seal & nails

(If included)

1/4”-20 x 5/8” carriage bolts (as required)

5/16” X 18 X 3/4”

CARRIAGE BOLTS

(as required)

5/16” x 1 5/8” Hex Head Lag Screws	(2) 5/16”Hex Nuts
(as required)	(as required)

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your	3
local yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com