Wayne-Dalton 9700 installation instructions Door Section Identification

	Door Section Identification
Tools Needed:	Hinges are always pre-attached at the top
	of each section (except top section)
	NOTE: End hinges are stamped with
	a number that identifies the stacking
	sequence of the section. #1 end hinges
	are always on the bottom section. #2 end
	hinges are on the lock section of a four
	section door. #3 end hinges are on the
	intermediate section of a four section door
	and on the lock section of a 3 section door.
	The section side view illustration shows the
	hinge profile of all the sections and can be
	used to identify each section.
	The bottom section can be identified by
	#1 end hinges, the factory attached bottom
	astragal, or by the bottom bracket warning
	labels on each end stile.
	The lock section can be identified by #2
	end hinges on a 4 section door and by #3
	end hinges on a 3 section door. Also, on a 3
	section door, the lock section will come with
	a warning label attached to the right or left
	endstile.
	The intermediate section
	(Only on a 4 section door) can be identified
	by #3 end hinges and a yellow warning
	label attached to the right or left endstile.
	The top section can be identified with no
	pre-installed end or center hinges on the
	section.

	Top Section
#3
End
Hinge	warning Label
	Intermediate Section
	(only on 4 section door)
#2 End Hinge on a 4 section door
#3 End Hinge on a 3 section door
	warning Label
	(only on 3 section door)
	Lock Section
#1
End
Hinge	Bottom Bracket
	warning Labels
	Bottom Section
	Astragal
	SECTION side view
7/8”	1 1/8”	1 3/8”
#1 end	#2 end	#3 end
hinge	hinge	hinge
BOTTOM
BRACKET
astragal
BOTtom	LOCK	INTermediate	top
	(4 section door)	(Lock on a 3 section door)
	Typical end hinge stamping location

4Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com