|
|
6 | Stacking Sections |
| |
|
|
Tools Needed: | NOTE: For door section identification |
Power Drill | see page 4. |
| |
7/16” Socket | NOTE: Make sure hinge leafs are flipped |
Driver | down, when stacking another section |
| |
| on top. |
| Place rollers in hinge tubes of the |
| second section (lock section). With |
| assistance, lift second section and |
| guide rollers into the vertical tracks. |
| Align the vertical lines on the alignment |
| stickers, located on the right hand side |
| on the back of the door sections. Also, |
| verify that the stiles on the front of |
| the door are aligned properly, prior to |
| securing the hinges. |
| Keep sections properly aligned and |
| fasten hinges, to connect the sections |
| using 1/4” - 14 x 5/8” |
| screws. Fasten center hinge(s) first |
| and end hinges last. Repeat for other |
| section(s) except top section. |
| IMPORTANT: Push & hold the hinge |
| leafs against section while |
| securing with 1/4” - 14 x 5/8” self- |
| tapping screws. End Hinges have |
| (6) screws and center hinges have |
| (3) screws. |
| NOTE: Install lock at this time (sold |
| separately). See instructions for |
| OPTIONAL SIDE LOCK INSTALLATION on |
| page 22. |
|
|
LOCK SECTION
hinge leaf flipped down
Right end hinge
Alignment 
stickers
(3) 1/4” - 14 X 5/8”
Center hinge(s)
(6) 1/4” - 14 X 5/8”
End hinges (left hand shown, right hinge symmetrically opposite)
10Please Do Not Return This Product To The Store. Contact your local
To find your
