Wayne-Dalton 9800 installation instructions Trolley Operator, Optional Installation

�	Trolley Operator
Tools Needed:	WARNING

OPERATOR MUST BE TESTED AT TIME

OF INSTALLATION AND MONTHLY

THEREAFTER AS DESCRIBED IN YOUR

INSTALLATION INSTRUCTIONS AND

OWNER’S MANUAL, TO ENSURE THAT

SAFETY FEATURES FUNCTION PROPERLY.

FAILURE TO TEST OR MAKE ANY

NECESSARY ADJUSTMENTS OR REPAIRS,

MAY RESULT IN SEVER OR FATAL INJURY.

1.Install operator rail 1/2” to 1-1/2” (13 - 38 mm) above high arc of top section of the door.

2.Mount operator to ceiling so that 1” to 1-1/2” (25 - 38 mm) clearance is maintained between trolley rail and top section when door is fully open (trolley rail will slope down towards rear).

3.Attach door arm to operator bracket installed in Step 11.

4.Attach operator rail to suitable mounting surface. (2 x 6 lumber minimum)

5.Attach operator to ceiling using perforated angle.

6.IMPORTANT! perforated Angles must be Securely attached to sound framing member(s).

OPERATOR RAIL

SUITABLE MOUNTING

SURFACE (2 X 6)

LUMBER MIN.

HEADER

DOOR ARM TO OPERATOR BRACKET

perforated angle

OPERATOR rail

OPERATOR

FRAMING MEMBERS

PERFORATED ANGLE

OPTIONAL INSTALLATION

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. 23

To find your Wayne-Dalton dealer; refer to your local yellow pages / business listings or go to Find a dealer area online at www.wayne-dalton.com