Tools Needed:
NOTE: The set screws used on all torsion counterbalance winding cones and cable drums, are now colored red. DO NOT identify right and left hand by the set screw color.
Slide the nylon center bushing onto the torsion tube followed by the springs and cable drums. The nylon center bushing, springs and cable drums must be positioned, as shown. With assistance, pick up the torsion assembly and slide one end of the tube through one end bearing bracket. Lay the torsion tube into the center bearing bracket and slide the other end of the tube into the opposite end bearing bracket. Position the torsion tube so that equal amounts of the tube extend out from each end bearing bracket.
Equal
SPACING
Center bracket
End bearing 
bracket
INSTALLATION
15 |
| Center bearing bracket |
|
Nylon Center Bushing |
| Torsion | |
|
| Spring | |
Tools Needed: | Slide the nylon center bushing into the | Torsion |
|
|
| ||
Step Ladder | stationary spring cone at the end of the | Spring | Stationary |
| spring and align the stationary spring |
| Spring cone |
| cone(s) with the holes in the center |
|
|
| bearing bracket. Secure the spring(s) to |
|
|
| the center bearing bracket with (2) | Nylon center |
|
| bushing | SPRING | |
|
| WARNING TAGs | |
|
| Stationary |
|
| IMPORTANT: The spring warning | Spring cone |
|
| tag(s) supplied must be securely |
|
|
| attached to the stationary spring | Center bearing bracket |
|
| cone in plain view. Should a |
| |
|
|
| |
| replacement spring warning tag |
|
|
| be required, contact Wayne- | Torsion |
|
| Dalton Corp. for free |
| |
| Spring |
| |
| replacements. | (2) | |
|
| ||
|
|
| |
|
|
| hex head bolts |
(2) |
|
|
|
| |||
|
|
|
| ||||
SPRING | WARNING TAGs |
|
|
|
| ||
|
|
| |||||
|
|
|
|
|
|
| |
Please Do Not Return This Product To The Store. Contact your local | 17 |
| |||||
To find your
