Wayne-Dalton 9800 Top Brackets, Installation, of the endcap and fasten using, other side

7	Top Brackets
Tools Needed:	Place the top bracket base against the
Power Drill	bottom of the u-bar, even with the edge
	of the endcap and fasten using
7/16” Socket
	(4) 1/4” - 20 x 7/8” self-drilling screws.
Driver
	Loosen the 5/16” - 18 nut. Repeat for
	other side.
	The top bracket slide will be adjusted
	and tightened in step 11.
	Insert a short shafted roller into the top
	bracket slide.

TOP BRACKET BASE

Short

Shaft

Roller

Endcap

U-bar

(1) 5/16” - 18 nut

Top section

(4)1/4” - 20 x 7/8” self-drilling screws

INSTALLATION

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. 11

To find your Wayne-Dalton dealer; refer to your local yellow pages / business listings or go to Find a dealer area online at www.wayne-dalton.com