Wayne-Dalton 9800 installation instructions Pre-Installation, Package Contents

Package Contents	NOTE: Depending on the door model, some parts listed will not be supplied if not
	necessary. rear supports may not be included with your door.

DOOR SectionS (as required)

Torsion Tube

(2) Horizontal Tracks RH/LH

operator bracket

Right & left	RH/LH Torsion springs	(2) Horizontal Angles
Drums	(as required)	(May be spotwelded)	(2) Top Brackets Assemblies	(2) vertical track assemblies
				RH/LH

Door stop & nails	weather seal & nails
(if included)		Rollers	pull rope & screw
	(if included)
cable assemblies			eye (if included)

Center Bracket	Center Bracket	End bearing Bracket	1/4”- 20 x 7/8” Self drilling
Bushing			screws (as required)

(2) 3/8”-16 x 3/4” 1/4”-14 x 5/8” Self Tapping				1/4”-20 x 11/16” Self Drilling
		1/4”-14 x 7/8” Self	1/4”-14 x 1/2” Self
Truss Head Bolts	Screws (as required)	Drilling Screws	Drilling Screws	Screws (as required)

5/16” x 1 5/8” Hex Head Lag	5/16” x 1 5/8” tamper resistant Lag	5/16” x 2” tamper-resistant Hex Head Lag
Screws	Screws (as required)	Screw (as required)

Windload label	5/16”x 1-1/4” Clevis	(6) 3/8”- 16 Hex Nuts	1/4”- 20 Flanged Hex	1/4” - 20 x 9/16”	(2) 3/8”- 16 x 1-1/2”
	PIN & COTTER PIN	(As required)	Nuts (as required)	track bolts	hex head bolts
	Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer.				3

To find your Wayne-Dalton dealer; refer to your local yellow pages / business listings or go to Find a dealer area online at www.wayne-dalton.com

PRE-INSTALLATION