Wayne-Dalton WDHC-20 user manual Revealing Device Codes, Learning Feature

REVEALING DEVICE CODES

If you have set up the Teleport™ remote control by searching for your device code (on the previous page), you may need to determine what the code is.

The example below is for a TV, to reveal the codes of other devices, substitute the appropriate key (e.g. DVD/VCR, AMP or SAT) for the device you are searching for.

1.On Teleport™ press TV once; it will blink once. Then press and hold SETUP until the TV key blinks twice.

2.Enter 990 on the numeric keypad; the TV key will blink twice.

3.For the first digit, press 1 once. Count the number of times the TV key blinks and write down the number in the leftmost TV Code box on page 10 (e.g., 3 blinks = 3.)

NOTE: If a code digit is 0, the selected mode key will not blink.

4.Repeat step 3 four more times for the remaining digits, except press 2 for the second digit, 3 for the third digit, 4 for the fourth digit and 5 for the fifth digit. Write each code in the box provided for TV codes on page 10.

LEARNING FEATURE

Teleport™ has many pre-programmed codes, but you may find there are one or more keys on the original remote which are not defined on Teleport™. As a convenience, Teleport™ includes a Learning feature so you can add functions that are unique to your original home entertainment remote (e.g., VCR tracking up or down.) Please note the following considerations:

•Your original remote controls must be in working order for Learning to work properly.

•Learned keys are mode-specific, so each one can store a unique function for each mode.

•Do not use the following keys for learning: Device keys, SETUP, RECORD (•), Numeric keypad keys

•Learning capacity is approximately 16 to 25 keys depending on the code being learned.

•Certain device functions are not learnable including multi-frequency types, some high frequency ones, and other unusual formats.

•For optimum learning, avoid high levels of ambient light such as natural sunlight or energy-efficient fluorescent lights.

NOTE: Please have your original remote controls handy before programming learning.

Continued next page...

13