Key Charts
KeyFunction
Use SETUP for all programming sequences. Also use to turn backlighting ON/OFF, if applicable.
Press POWER once to turn ON or OFF a home entertainment device.
Press TV, DVD/VCR, SAT or AMP once to select a home entertainment device to control. Also see DEVICE MODE TABLE on page 8.
Each device mode key has an embedded LED (red light) that blinks upon selection and indicates the remote control is working and (after programming) is sending signals.
Use GUIDE to display the program guide. Use ALL to control all lighting nodes in the network.
Use INFO to display the current channel and program information.
Use the CURSOR keys to move the cursor in the program guide and menu screens and to navigate within the interactive service.
Use OK to choose options, PPV events, and to tune to programs from the program guide.
Use EXIT to exit out of your cable converters menu and guide.
Use VOL+ (or VOL -) to raise (or lower) the audio volume.
Use BRIGHT or DIM to control the brightness level of your lights.
Use CH+ (or CH-) to select the next higher (or lower) channel.
For DVD players, use these keys to skip forward (or reverse) through chapters. For amplifiers/receivers, use these keys to select the next higher (or lower) preset station.
Use ON or OFF to turn your
Continued next page...
6
