Wayne-Dalton WDHC-20 user manual Z-Wave Network Reset, Z-Wave Network Re-Discovery

Z-WAVE®NETWORK RESET

Z-Wave®Network Reset clears all Z-Wave®node and network information from Teleport™.

1.Press the HOME key on Teleport™.

2.Press and hold SETUP until the HOME red LED blinks twice.

3.Enter 969 on the numeric keypad. The HOME red LED blinks continuously.

The HOME green LED blinks twice to indicate a successful operation.

NOTE: If the HOME red LED emits one long, steady blink, the operation was not successful; repeat the sequence.

Z-WAVE®NETWORK RE-DISCOVERY

Network re-discovery is used to make your Z-Wave®network more efficient and improve performance if, for example, a Z-Wave®plug-in module was moved across the room.

NOTE: This operation requires Teleport™ to be the primary controller.

CAUTION: This operation may take several minutes depending on the size of your network.

1.On Teleport™, press the HOME key.

2.Press and hold SETUP until the HOME red LED blinks twice.

3.Enter 961 on the numeric keypad. The HOME red LED blinks continuously.

The HOME green LED blinks twice to indicate a successful operation.

NOTE: If the HOME red LED emits one long, steady blink, the operation was not successful; repeat the sequence.

27