Wayne-Dalton WDHC-20 user manual Macro KEY Basics, Programming a Macro Key

MACRO KEY BASICS

The Teleport™ remote control includes a macro key feature. Macro keys allow you to create small programs which activate a series of key presses in a specific order(sequence of commands.) For example, you can set up a macro to do the following set of actions with a single key press: change the channel on your TV, start playing a DVD and dim the lights.

NOTE: Any previously-programmed macro key must be cleared before it can be changed, see “Clearing a Macro Key” below.

Programming a Macro Key

1. On Teleport™ press and hold SETUP until the last-selected mode key blinks twice.

2. Enter 995 on the numeric keypad. The last-selected mode key blinks twice.

3.Select a macro key, for example, the number 1 on the numeric key pad, and press it once.

4.Press the key sequence you want to program

into the macro. For example, to turn on your TV and raise its volume, press TV followed by VOL+.

NOTE: You can program up to 15 key presses into one macro.

5. Press and hold SETUP until the last-selected mode key blinks twice.

6.To add another macro, repeat Steps 1 - 5, substituting the new key sequence to be added in Step 4.

NOTE: Programming more than 5 macros on the same macro key overwrites previous settings.

Clearing a Macro Key

1. On Teleport™ press and hold SETUP until the last-selected mode key blinks twice.

2. Enter 995 on the numeric keypad. The last-selected mode key blinks twice.

3. Press the macro key you want to clear once.

4. Press and hold SETUP until The last-selected mode key blinks twice.

This macro key is now clear and ready for re-programming. To re-program, see “Programming a Macro Key” above.

18