Wayne-Dalton WDHC-20 user manual Searching For Your Code, Turn on your TV

SEARCHING FOR YOUR CODE

If your home entertainment device does not respond to the Teleport™ remote control after trying all of the codes listed for your brand, or if your brand is not listed at all, try searching for your code using the following procedure:

NOTE: The example shown below is for a TV, to search for codes of other devices, substitute the appropriate mode key (e.g. DVD/VCR, AMP or SAT) for the device you are searching for.

1. Turn on your TV.

2. On Teleport™, press TV once; it will blink once. Then press and hold SETUP until the TV key blinks twice.

3. Enter 991. The TV key will blink twice.

4. Aim Teleport™ at the TV and press PWR once.

5. Press and release the CH+ key continuously until the TV turns off.

NOTE: In the search mode, Teleport™ will send IR codes from its library to the selected device, starting with the most popular code first.

6. Press PWR. The TV should turn on, then press SETUP to lock in the code.

NOTE: If the TV does not turn on during step 6, then slowly press and release CH- to back through the codes. When the TV turns on press SETUP to lock in the code.

12