Wayne-Dalton WDHC-20 user manual Unlocking All Volume Control Global Volume Unlock

Unlocking Volume Control for a Single Device (Individual Volume Unlock)

1. Assuming Global Volume Lock is active, select a mode on the Teleport™ remote control that you want to unlock (e.g., SAT) and press it once.

2. Next, press and hold SETUP until the device key blinks twice.

3. Enter 993 on the numeric keypad. The last-selected device key will blink twice.

3.Press VOL- once. The last-selected device key will blink twice.

5.Repeat Steps 1 - 3 for each device you want volume to be unlocked.

Now, after you select a device that has volume unlocked (e.g. SAT) pressing VOL+, VOL-, or MUTE will control only that device’s volume

Unlocking All Volume Control

(Global Volume Unlock)

NOTE: Performing these instructions will set independent volume control for all programmed devices.

1.On Teleport™ press and hold SETUP until the last-selected mode key blinks twice.

2. Enter 993 on the numeric keypad. The last-selected device key will blink twice

3. Press VOL+ once. The last-selected device key will blink four times.

Continued next page...

17