23.Attach the Backrest Cap (40) to the Backrest Frame (17) with two M4 x 16mm
Attach a Bumper (168) to the Backrest Frame (!7) with an M4 x 16mm
Attach the Right Pinch Guard (42) to the Backrest Frame (17) with two M4 x 9mm Self4apping
Screws (106). Attach the Left Pinch Guard (41) in the same manner.
24.Attach the Backrest (24) to the Backrest Frame
(17)with four M6 x 38ram Screws (128) and four M6 Washers (!26).
25.Insert the rod on the Backrest Frame (17) into the slot in the Seat Carriage (!6). Hold the Backrest Frame vertically over the Seat Carriage and slide the rod into the slot, as shown in the inset drawing.
23
106
4!
24
126
25
104
%
168
_.104
157
14